
Mark Levinson JC-1AC Moving-Coil Head Amp - Super Rare
General:
This is a super rare moving-coil (MC) phono cartridge Head Amp complete with its original Mark Levinson outboard power supply.
A fantastic match to any preamp and moving-coil (MC) phono cartridge.
Featuring internal DIP switches to customize to your specific cartridge needs.
Working just like the day it left the factory in 1970's.
Listing Notes Cosmetic:
The cord entering the external transformer box has pulled out a bit from the box at some point in the past. Still safe and functional.
Technical notes:
This device is a head amp only. It's intended be used to interface a low-output moving-coil (MC) cartridge with a conventional moving-magnet (MM) phono stage built into your preamplifier/receiver/integrated amplifier.
There are three gain settings available via DIP switches on the inside of the device.
This unit was serviced in house at SkyFi. We replaced all of the electrolytic and tantalum capacitors, and adjusted the various trimmers for optimal channel balance. The gain is currently set to the 0 dB position (mid).
Click below to add our recommended matching cables from Kimber Kable, all brand new as SkyFi is an official Kimber dealer.
Kimber Kable - RCA Interconnects - Better
Kimber Kable - RCA Interconnects - Best
Kimber Kable - Phono Interconnects - Better
Kimber Kable - Flagship Phono Interconnects - Best
|
Item |
Included |
|
Original Box |
Not Included |
|
Manual |
Not Included |
|
Remote |
Not Applicable |
|
Cables |
Yes - Power Only |
|
Physical Condition |
8 / 10 |
|
Working Condition |
10 / 10 |
Original: $1,290.00
-65%$1,290.00
$451.50More Images












Mark Levinson JC-1AC Moving-Coil Head Amp - Super Rare
General:
This is a super rare moving-coil (MC) phono cartridge Head Amp complete with its original Mark Levinson outboard power supply.
A fantastic match to any preamp and moving-coil (MC) phono cartridge.
Featuring internal DIP switches to customize to your specific cartridge needs.
Working just like the day it left the factory in 1970's.
Listing Notes Cosmetic:
The cord entering the external transformer box has pulled out a bit from the box at some point in the past. Still safe and functional.
Technical notes:
This device is a head amp only. It's intended be used to interface a low-output moving-coil (MC) cartridge with a conventional moving-magnet (MM) phono stage built into your preamplifier/receiver/integrated amplifier.
There are three gain settings available via DIP switches on the inside of the device.
This unit was serviced in house at SkyFi. We replaced all of the electrolytic and tantalum capacitors, and adjusted the various trimmers for optimal channel balance. The gain is currently set to the 0 dB position (mid).
Click below to add our recommended matching cables from Kimber Kable, all brand new as SkyFi is an official Kimber dealer.
Kimber Kable - RCA Interconnects - Better
Kimber Kable - RCA Interconnects - Best
Kimber Kable - Phono Interconnects - Better
Kimber Kable - Flagship Phono Interconnects - Best
|
Item |
Included |
|
Original Box |
Not Included |
|
Manual |
Not Included |
|
Remote |
Not Applicable |
|
Cables |
Yes - Power Only |
|
Physical Condition |
8 / 10 |
|
Working Condition |
10 / 10 |
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
General:
This is a super rare moving-coil (MC) phono cartridge Head Amp complete with its original Mark Levinson outboard power supply.
A fantastic match to any preamp and moving-coil (MC) phono cartridge.
Featuring internal DIP switches to customize to your specific cartridge needs.
Working just like the day it left the factory in 1970's.
Listing Notes Cosmetic:
The cord entering the external transformer box has pulled out a bit from the box at some point in the past. Still safe and functional.
Technical notes:
This device is a head amp only. It's intended be used to interface a low-output moving-coil (MC) cartridge with a conventional moving-magnet (MM) phono stage built into your preamplifier/receiver/integrated amplifier.
There are three gain settings available via DIP switches on the inside of the device.
This unit was serviced in house at SkyFi. We replaced all of the electrolytic and tantalum capacitors, and adjusted the various trimmers for optimal channel balance. The gain is currently set to the 0 dB position (mid).
Click below to add our recommended matching cables from Kimber Kable, all brand new as SkyFi is an official Kimber dealer.
Kimber Kable - RCA Interconnects - Better
Kimber Kable - RCA Interconnects - Best
Kimber Kable - Phono Interconnects - Better
Kimber Kable - Flagship Phono Interconnects - Best
|
Item |
Included |
|
Original Box |
Not Included |
|
Manual |
Not Included |
|
Remote |
Not Applicable |
|
Cables |
Yes - Power Only |
|
Physical Condition |
8 / 10 |
|
Working Condition |
10 / 10 |





















